Industrial Powders

 ·         LATAN-AL gives soft, very good grain tightening with good fullness.

·         LATAN-AL improves the deeper and brighter dyed shade.

·         LATAN-AL gives exceptionally good surface handle and uniform deeper dyeings.

·         In suede and nubuck leathers, LATAN-AL produces very fine uniform silky nap.

·         LATAN-AL gives good buffing properties.

·         LATAN-AL is compatible with all the synthetic tanning agents and mineral salts and

                acids of low concentration.

• LATAN CR is light fastness is very good and astringency is very low;thus there is 

   excellent grain smoothness and fineness.

• LATAN CR stability to electrolytes is good, thus suitable for all procedures.

• If the leather is retanned with LATAN CR, it offers, on account of the limited anionic

  character, a quite good performance as far as dyeing is concerned.

• LATAN CR promotes softness, dye ability & buffing when used to retan suede.

• LATAN CR exhausts almost completely from the retanning bath at elevated

   temperature & pH. (retanning with LATAN CR & neutralizing in the same bath)

• LATAN CR used as a pretanning agent for leathers that are to be vegetable

   Synthetically tanned, on account of its high contents of masked chromium complexes, 

   effects rapid penetration of the pelts & substantially accelerates the subsequent tanning

   process. Thus it gives fullness as well as softness to the leather.

• LATAN CR speeds up & equalizes penetration of chromium sulphate resulting in a very 

   uniform chrome distribution & improves the softening effect.

 LATAN-R7 has a selective filling action, which is mainly deposited in the loos structured parts of the leather.

mproves the fullness of chrome leathers & tightens the grain with good dye intensity.

Due to non-astringent nature of LATAN-R7, there will not be any drawn grain effects.

LATAN-R7 specially recommended for black and brown leather.

 The peculiar resinous nature of LATAN-R7 gives a desirable buffing surface.

 LATAMOL-NK is preferably used in amount from about 2.0 – 6.0 % by weight pesticide.

LATAMOL-NK is used as a dispersing agent in sulpher WDP and WDG pesticide and insecticides formulations.

Latamol-pt  is used as a dispersing agent in sulphur wdp & wdg pesticide and insecticide formulations.

 LATAN-PR is neutral, anionic, water-soluble tannin in powder form.

LATAN -PR is generally used to neutralize the leather thereby improving level dyeing.

LATAN-PR is used for leveling the shade of dyed leather & for dispersing vegetable tannins & thereby improves the

penetration.

LATAN-PR is compatible with synthetic, vegetable & chrome tannins and may be used with resin tannins.

LATAN-PR does not react with iron salts to give colored substances.

Based on modified tara

latan vt an eco friendly product recommended for all types of leather

latan -vt disperses readily in water & can be addeddirectly to the drum aspowder in the normal way.

latan-vt  gives very good filling action with a tight, fine smooth grain

latan-vt imparts good buffing properties with mellow handle.

latan-vt improves polish ability and burnishing property.

latan -vt imparts good light & heat fastness properties.

sample application and uses

*caution: - color of the product may vary due to the variation in color of natural

extracts being used in manufacturing the product.

latan- vt is recommended for automotive and domestic upholstery and high

quality upper leathers.

latan- vt is disperses readily in water and can be added directly to the process

vessel as a powder in the normal way.

in comparison with commonly used vegetable tannins such as mimosa, chestnut or

quebracho, is its much better light fastness, it also gives clear and more brilliant dye shade.

latan vt is sensitive to ferric ions and the formation of iron stains to counter

this latan vt has been adequately desensitized by the addition of a complexing

agent. if however iron stains should forms, the addition of an iron complexing agent is

recommended 0.2 to 0.5 % based on shaved or pelt weight.

latan-vt can be added after neutralization of the leather at 4 - 45 % on shaved

weight of the leathers for all types of dyed leathers, depending on the required leather

character and substance.

latan-m6 is anionic and therefore compatible with all anionic tanning materials, dyes and auxiliaries.

latan-m6 is incompatible with aluminium tanning agents.

latan-m6 produces soft, tight grained leather with good milling effects.

although latan-m6 is non-astringent, it has a strong filling action.

latan-m6 stability is not impaired at ph above 3.0

latan-m6 is anionic and therefore compatible with all anionic tanning  materials, dyes and auxiliaries.

latan-m6 has hardly any lightening effect on the colour & improves the buffing properties of the leather, suede & nubuck as well.

.

BASED ON MODIFIED MYRABOLAN EXTR                              

·        An eco friendly product recommended for all types of leather.

·        LATAN VM disperses readily in water & can be addeddirectly to the drum as powder in the normal way.

·        LATAN VM gives very good fullness & tightness with a smooth & fine grain.

·        LATAN VM imparts good buffing properties with mellow handle.

·        LATAN VM improves polish ability and burnishing property.

·        LATAN VM enhances grain properties of the leathers.

·        LATAN VM imparts good light & heat fastness properties.

USES:-

 LATAN VM canbe used for making Cow softy, Bag leathers, Goat glazed kid

 and Garment leathers, Sheep Nappa and Cabretta etc in the range 4 – 6 % on shaved weight of the leather.

• LATAN-DI is compatible with all vegetable & synthetic tanning materials & is not sensitive to salt.

• LATAN-DI has a wide range of applications in the retannages of all types of chrome leather & 

   in vegetable tannages.

• LATAN-DI yields full, resilient & almost white leather.

• When used in vegetable tannages, Its accelerates the rate of penetration & lightens the shade 

   of resultant leather

• LATAN-DI imparts good fiber & grain resilience to vegetable tanned leather & produces

   a high yield.

• LATAN-DI has good leveling effect on the dyeing & is particularly suitable for paler shades.

• LATAN-DI is suitable where high light fastness and heat resistance are desired.

• LATAN-DI treated leather shows very good filling effect and gives remarkable fullness and 

   fine smooth grain pattern.

• LATAN-DI also exhibits buffering action & slight neutralizing effect.

LATAN LF: That guarantees a good exhaustion from the bath,remarkable fullness and fine grain pattern.

LATAN LF : is recommended for white leather owing to its property of yellowing only after prolonged exposure.

LATAN LF : renders good filling effect and brightens the leather colour considerably in dyeing with pastel colours.

LATAN LF :  is compatible with all syntans and vegetable extracts,

When LATAN LF is suede in conjunction with vegetable extracts; it makes the colour very much lighter.

High tanning power of LATAN LF allows its use as solo tanning agent in reptile items and natural coloured leather goods.

Modified vegetable syntan based on Quebracho.     

·        LATAN-VQ aneco friendly product for manufacturing of all types of leather.

·        Leathers treated with LATAN-VQ  product present a light pale pink-brownish surfacecolor.

·        LATAN-VQ disperses readily in water & can be addeddirectly to the drum as powder in the normal way.

·        LATAN-VQ gives medium softness, excellent fullness with mellow handle.

·        LATAN-VQ gives maximum filling properties. gives firm and smooth leather grain.

·        LATAN-VQ gives medium tight, smooth, leveled grain ready for buffing and embossing.

·        LATAN-VQ is compatibility with vegetable extracts and synthetic tannins.

·        LATAN-VQ imparts medium light & heat fastness properties.

*CAUTION: - Color of the product may vary due to the variation in color of natural extracts

being used in manufacturing the product.

SAMPLE APPLICATION AND USES:-

For an excellent effect in the filling of leathers, the extract added to the tanning and retanning drums should be in powder non dissolved and preferently in “short baths”.

LATAN-VQ can be used in combination with any type of vegetable tanning products, synthetic and resin-based products.

For a better use of the filling properties of the extract, it is advisable to add LATAN VQ in two or three portions along with the auxiliaries.

LATAN VQ is suitable for retanning for all types of chrome and vegetable tanned leather,

LATAN VQ is sensitive to ferric ions and the formation of iron stains. To counter this

LATAN VQ has been adequately desensitized by the addition of a complexing agent. If

However iron stains should forms, the addition of an iron complexing agent is recommended

(0.2 to 0.5 % based on shaved or pelt weight.)

% based on the shaved weight, depending on the required leather character and substance.

Retannage of automotive upholstery wet blue:

Up to 10.0 %

Retannage of mineral free leathers:

Up to 10.0 %

Main tannin for full vegetable tanned leather:

Up to 20.0 %

Corrected grain leathers:

Up to 6.0 %

Sheep and goatskin leathers:

Up to 8.0 %

Softie and milling full grain leathers:

Up to 6.0 %

Nubuck and Suede leathers:

Up to 8.0 %

LATCRIT-NS powder is an excellent dispersing agent for cement particles.

LATCRIT-NS promotes fine dispersion.

LATCRIT-NS controlled rheological behavior of cementitious compositions ensuring for extended workability.

Using LATCRIT-NS normal flow and slump characteristics can be maintained with a reduced water content ratio in the concrete mix, resulting in increased final strength.

LATCRIT-SM is an excellent dispersing agent for cement particles and promotes fine dispersion with controlled rheological behaviour of cementitious compositions. 

Mortars containing LATCRIT-SM exhibit extended workability, flowability and smoothing characteristics, and superior self-healing properties.

Typical dosage recommendations fall between 0.2 – 2.0% by weight of cement.  However, pre-tested rheological properties should dictate the final dosage selection in each particular situation.

 LATAN P is a pretanning agent of medium astringency, it tans hide readily with high bleaching effect

LATAN P is used as a retanning agent for chrome tanned leather, it imparts smoothness & firmn

 LATAN P as a pretanning agent gives light, smooth & undrawn grai

LATAN P can be used for intermediate treatment of chrome tanned leather to minimize the

astringency of vegetable tannins

LATAN P when used after neutralization at pH 4.0 - 4.5 for intermediate treatment, it increases buffability.

LATAMOL-DNP is used as a dispersing and wetting agent for Agro formulation.

LATAMOL-DNP is used as a dispersing agent in Sulphur WDP & WDG pesticide and insecticide formulations. This Sulphur WDP & WDG is especially effective in controlling powdery mildew and eriophyid mites on grapes, peaches, plums, nectarines, tomatoes and cucurbits. This acaricide is used to control grey mites on citrus fruit plants.

LATAMOL BX is used in pesticide WDP formulations like Acephate 75%, Sulphur 80% WDP, Carbendezim 50% SDP, etc).as a powerful wetting agent.